High Speed Steel HP-25-12 Eccentric Anti Blade Counterboring And Reverse Counterboring Tool

Reverse Counterboring Tool is a special cutting tool mainly used for machining reverse counterbore holes in existing holes. The following is a detailed explanation of the Reverse Countering Tool:

Definition and purpose:
Reverse Counterboring Tool is a cutting tool used to machine reverse, flat bottomed holes in existing holes. This tool is particularly useful when specific shapes or depths of reverse countersunk holes are required, and is commonly used in fields such as mechanical manufacturing and mold manufacturing.
characteristic:
Reverse machining: Unlike traditional counterbore tools, the Reverse Counterbore Tool cuts in the internal direction of the hole during machining, forming a reverse counterbore.
Flat Bottom: Similar to conventional countersunk hole tools, Reverse Counterboring Tool can also machine holes with flat bottoms to accommodate the installation of fasteners or other components.
High precision: Due to the need for precise control of cutting depth and shape, Reverse Counterboring Tool typically has high machining accuracy.
Operation method:
Reverse Countering Tool is usually installed and used on equipment such as drilling machines, milling machines, or CNC machine tools.
When operating, first use a regular drill bit to drill an initial hole on the workpiece, and then replace it with the Reverse Counterboring Tool to machine a reverse countersunk hole on the basis of the initial hole.
Technical parameters (based on reference articles, but please note that these parameters may vary depending on different brands and models):
Diameter range: The diameter range of the Reverse Counterboring Tool may cover different sizes from a few millimeters to tens of millimeters.
Cutting depth: The cutting depth depends on the specific machining requirements and workpiece material, but Reverse Counterboring Tool can usually accurately control the cutting depth.
Material: Reverse Countering Tool is usually made of hard alloy or other wear-resistant materials to ensure its high hardness and wear resistance.
matters needing attention:
When using the Reverse Countering Tool, it is necessary to ensure that the tool matches the workpiece material to avoid using inappropriate tools that may result in poor machining results or tool damage.
When operating, it is necessary to follow the safety operating procedures of the machine tool to ensure the safety of personnel and equipment.
Maintenance and upkeep:
Regularly clean and lubricate the Reverse Counterboring Tool to maintain its good working condition.
If tool wear or damage is found, a new tool should be replaced in a timely manner to ensure machining quality and efficiency.
Through the above explanation, I hope you have a clearer understanding of Reverse Counterboring Tool.